Bervolo WAT Pro Max, White

The elegance of technology comes to your life!

The WAT Pro Max headphones are water-resistant, with a super-powerful charging box, fast Bluetooth 5.1 connection and great sound. Basically, they'll make you fall in love with wireless headphones. They're universally compatible with any Bluetooth-enabled device. From now on, you can communicate anytime, anywhere without worrying about the noise around you.

Easy to use

To connect the headphones with the device you want, just take the headphones out of the box and they're ready to connect. Once you're done using the headphones, you can put them back in the box, they'll automatically disconnect and start charging.

Smart and easy control

Each headset has a multi-function touch button that you can activate with a gentle press. You can answer/reject a call, play/stop or change the song. You'll be free to move around without having to stand next to the device to control it.

Escape at the touch of a button

Experience premium audio quality with noise reduction ANC.

Up to 5 hours battery life

The headphones can run continuously for up to 5 hours. After this time, they will need recharging. Using the charging case, the headphones can be used for up to 20h.

6 mm dynamic speaker andbuilt-in dual microphones

Now you can enjoy high quality sound using the WAT Pro Max headphones with a dynamic speaker of only 6 mm. Both headphones come with built-in microphones and voice assistant.

Features:

• three-dimensional shape makes them easy to wear and use
• ergonomic design that is easy to fit in the ear without discomfort
• ANC noise reduction capability
• headphones are IPX4 waterproof
• can be used by touch-touch high-pitched sounds are clear high-class digital microphones for stylish and quality conversations.

Technical specifications:

• Bluetooth version: 5.1
• works up to a distance of 10 metres
• 250 mAh case battery
• headset battery: 30 mAh
• USB type C stand-by 120 h
• waterproof IPX-4
• material: ABS+PC
• 6 mm dynamic speaker
• composite speaker membrane
• headphones charging time: 40-60 minutes
• charging time case: 2 hours
• sound frequency 20-20000Hz
• Attention! Only bluetooth headphones are waterproof. The charging box is not waterproof.

Charging headphones

The charging case has a built-in battery. When sufficiently charged, you can put the headphones inside to charge them. When charging is complete, a green light tells you that the procedure is finished.

Charging the case

Connect the housing to the type C cable. During charging, an orange light flashes. When fully charged, the orange light remains on. Charging time is 40-60 minutes.

Pairing the headphones

Step 1. Remove the headphones separately from the charging case or long press to switch them on and they will pair automatically. Then the LED on one of the headphones will flash red/blue.

Step 2. Open your phone's Bluetooth to search for the new device and connect it.

Instructions for use

Binaural function:

• One touch: switch music on/off, answer/end call
• press left earpiece twice: next song
• press right earpiece twice: next song
• press and hold for 2 seconds: reject call
• press and hold for two seconds and release the button: access the voice assistant.

Switch on the headset

A. Press the button for 2 seconds.

B. Remove the headphones from the case and they will switch on automatically.

When the headphones connect to the same device again, open the charging case cover, the headphones will switch on automatically, then reconnect and you will hear a "Connected" confirmation voice message.

Close the headphones

A. Press and hold for 5 seconds.

B. Place the headphones in the charging case and they will automatically switch off

If not in use for 3 minutes, they will automatically switch off. Play/Pause music After connecting with the phone, press with one click on the left or right earphone to play the song and to pause the song do the same.

Call answer and hang up

When connected to the phone, press once to answer the phone.

If you want to reject the call, press and hold for 2 seconds.

To end a call, press once on the headset.

Frequently Asked Questions

A. When the headset cannot be switched on - Check that the headset is switched on (after the charging case is plugged into the USB and the headset has been charging for no more than one hour).

B. When only one headset can be heard or the headphones have not connected to each other

• Make sure both headphones are charged and can be switched on
• When the headphones are in sleep mode, press 7 times to reconfigure to the settings in the app
• Press 3 seconds to switch on the headphones or remove them from the charging case (when the case is switched on), the headphones will switch on automatically.

C. When your phone cannot detect wireless headphones

• Make sure both headsets are open
• Check if they are connected to other devices
• Switch the headphones off and on.

D. When headphones are locked or disconnected during a call or music playback

• The headphones do not have enough battery
• The distance between the phone and headphones is more than 10-15 m
• There are connection obstacles between the headphones and the phone, such as a wall
• The headphones are not paired or synchronised, so they need to be restarted and re-paired.

The package contains:

• a charging case
• a pair of wireless headphones
• one type C charging cable
• user manual in English.

Colour: white.